-
Description
-
Application Instruction
-
Additional Information
WATER SPOT RESISTANCE
COMPATIBILITY
SUPER SLICK
THE STORY BEHIND OVERCOAT V3
With the introduction of Ceramic V3 and its superior hydrophobic properties, it was not recommended to apply Overcoat V2 over it, as Ceramic V3 had the best performing hydrophobics. In order to maintain the same level of hydrophobics and self cleaning ability that we are seeing with Ceramic V3, we have had to make significant improvements to Overcoat. The new Overcoat V3 matches the hydrophobics and self cleaning properties of Ceramic V3. We’ve borrowed what we have learned with the extensive development of Ceramic V3, and applied it to Overcoat. The Ceramic V3 has had an overwhelmingly positive response because of its hydrophobics and self cleaning properties, with the new Overcoat V3 it allows us to extend these properties across our range of coatings.rnrnThe main properties of Overcoat V3 was compatibility with our other coatings, ease of use, and extreme self cleaning and hydrophobic properties. Compatibility with our entire range of coatings means that this product is a universal top coating that can be used to immediately elevate the hydrophobic and self cleaning properties of any of our coatings, or as a maintenance topper to make sure that the coating properties are maintained. Ease of use is something that we are paying a lot of attention to with the new developments in our lineup. Overcoat V3 is extremely easy and forgiving to use. The main improvements with Overcoat V3 has been the self cleaning and hydrophobic properties, which are now best-in-class amongst top coating products.
ADDS WATER SPOT RESISTANCE
OVERCOAT V3 keeps exterior vehicle surfaces cleaner for longer due to its superior hydrophobic and self-cleaning properties. Surfaces coated with this product will have a lower water slide angle, allowing it to easily roll off the surface, reducing the potential for water spots. This means vehicles will remain cleaner over time and, when washing, water and contamination will release from the surface with ease.
COMPATIBLE WITH OTHER COATINGS
Overcoat V3 is compatible with our entire range of ceramic and self-healing coatings, which improves its hydrophobicity and self-healing properties. As a result, this topcoat is extremely versatile and universal. This product can also be used as a maintenance topper to keep the coating properties in good condition.
SUPER SLICK
Overcoat V3’s super low free surface energy makes the surface feel silky smooth to the touch and has super hydrophobic properties. This property will help to improve the water sheeting and self-cleaning properties of any of our ceramic coatings.
Frequently Asked Questions
A vintage pen refers to the unique applicator design of Overcoat V3 ceramic coating topper, which features a precision pen-style application system. This ceramic coating topper refreshes and enhances existing ceramic coatings by restoring their hydrophobic properties and water beading performance. The vintage pen design allows for controlled, precise application on specific areas or full vehicle coverage.
Overcoat V3 ceramic coating topper requires minimal surface preparation and applies quickly over existing ceramic coatings, while new ceramic coating applications need extensive paint correction and curing time. The topper restores performance without removing the base coating, making it ideal for maintenance rather than complete reapplication. New ceramic coatings provide longer base protection, while toppers focus on refreshing hydrophobic performance.
Overcoat V3 hydrophobic coating prevents new water spots from forming by causing water to bead and roll off surfaces quickly. However, existing heavy water spots should be removed before applying the ceramic coating topper for best results. Once applied, the enhanced hydrophobic properties make future water spot removal much easier and help prevent mineral deposit buildup.
Overcoat V3 ceramic top coat typically lasts 3-6 months depending on environmental conditions and vehicle use. Regular washing and proper maintenance can extend the topper's performance, while harsh conditions may require more frequent reapplication. The ceramic coating topper is designed for easy reapplication without removing the underlying ceramic coating, making maintenance straightforward and cost-effective.
Overcoat V3 hydrophobic ceramic coating is completely safe for automotive paint, clear coat, and existing ceramic coatings. The ceramic coating topper bonds chemically with surfaces without causing damage or discoloration. It actually provides additional protection against UV rays, environmental contaminants, and minor scratches while enhancing the existing coating's protective properties.
Overcoat V3 ceramic coating topper enhances the existing finish with increased gloss and depth while maintaining the original ceramic coating's appearance characteristics. The hydrophobic coating creates a smooth, slick surface that improves water beading and makes the paint appear more vibrant. The finish remains true to the base coating while adding enhanced self-cleaning properties and shine.
Overcoat V3 ultra hydrophobic coating works on all exterior painted surfaces, glass, wheels, and plastic trim that have existing ceramic coating protection. The ceramic coating topper is safe for use on clear coat, single-stage paint, and wrapped surfaces. Avoid application on brake components, exhaust systems, or areas that require grip like pedals and steps.
Maintain Overcoat V3 ceramic maintenance spray performance through regular washing with pH-neutral soap and avoiding harsh detergents or abrasive cleaners. The ceramic coating topper benefits from periodic touch-ups in high-wear areas and proper drying techniques to prevent water spots. Gentle maintenance preserves the hydrophobic properties and extends time between full reapplications. For regular washing, consider our car wash soap.
PRODUCT DESCRIPTION
FEYNLAB® OVERCOAT V3 is the natural evolution of FEYNLAB OVERCOAT. In version 3, FEYNLAB utilizes a new resin system that increases the chemical protection, water spot resistance, hydrophobic properties, and ease of application.
The super low free surface energy of FEYNLAB® OVERCOAT V3 causes the surface to feel silky smooth to the touch and display super hydrophobic properties. FEYNLAB® OVERCOAT V3’s sole purpose is to add great water sheeting and self-cleaning properties to any of our ceramic coatings.
FEYNLAB® OVERCOAT V3 is intended to be applied on top of our other coatings and is the outermost layer of protection.
PRODUCT BENEFITS
FEYNLAB® OVERCOAT V3 keeps exterior vehicle surfaces cleaner for longer due to its superior hydrophobic and self-cleaning properties. This means vehicles will remain cleaner over time and, when washing, water and contamination will release from the surface with great ease.
FEYNLAB’s true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.
APPROVED SURFACES
APPROVED SURFACES FOR APPLICATION – DO NOT apply to unapproved surfaces*
Clear Coated Surfaces
Vinyl & Vinyl Wrapped Surfaces
Paint Protection Film (a.k.a. PPF or Clear Bra)
As an overcoat on surfaces that have previously been coated with:
FEYNLAB® CERAMIC (current version)
FEYNLAB® CERAMIC ULTRA (current version)
FEYNLAB® CERAMIC PLUS
FEYNLAB® HEAL LITE
FEYNLAB® HEAL PLUS
FEYNLAB® PLASTIC
FEYNLAB® WHEEL AND CALIPER
FEYNLAB® PLASTIC BLACK
FEYNLAB® PPF & VINYL
*The use of Feynlab products on any surface not explicitly listed in the instructions booklet is done at the user's own risk. If damage occurs to the surface as a result of using the product on an unlisted surface, we will not be held liable for any such damage.
INCLUDED
30ml (1oz) FEYNLAB® OVERCOAT V3
CAUTIONS
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.
PREPPING THE SURFACE
Thoroughly clean vehicle using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.
DIRECTIONS
If applying over another FEYNLAB® coating, wait 2 hours (minimum of 1.5 and a maximum of 4 hours) for the base coating to set up. Then apply in the same application pattern as the base coating.
Prior to application, place vehicle in a well-lit, temperature-controlled 50°F-85°F (10°C-30°C), & contamination free environment. Have plenty (4 or more) new microfiber towels, 2-3 microfiber sponge applicators, or 1-2 foam applicators on hand before application.
Once the car is prepped, we recommend taping off and protecting all unapproved surfaces. By performing this step, you minimize the risk of etching by the solvents in FEYNLAB® OVERCOAT V3 on unapproved surfaces, such as rubber lining around windows and doors. Avoid these surfaces with OVERCOAT V3 and wipe off immediately if any contact occurs.
Shake OVERCOAT V3 vigorously for 30 seconds before use.
Inspect the neck of the bottle for any hardened coating crystals. Carefully clean the neck of the bottle with a microfiber towel if any appear, as these can drop on to your applicator pad, and scratch the surface during application.
APPLICATION INSTRUCTIONS
Apply enough OVERCOAT V3 to a microfiber applicator to fully cover a single panel only, such as a door or half a hood.
Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
Next, fill in the framed area with slightly overlapping horizontal (left to right) straight lines over the entire panel. After, switch to vertical overlapping lines. This cross-hatching pattern ensures even application.
Apply to 2 to 3 panels before wiping off OVERCOAT V3 following same pattern of application, using two clean microfiber towels. Towel A (left hand) will remove the majority of coating residue. Towel B (right hand) will remove any remaining residue, revealing a clear surface.
If the surface is difficult to wipe clear or appears hazy, reduce the application area.
Recommended Maximum Area of Application:
One panel at a time, then wiping off in same pattern as application. This will help reduce the chance for the coating to “shadow.”
FINAL INSPECTION
Carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly, edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe than later, when the coating has set- up and curing has started.
INFRARED CURING (RECOMMENDED, BUT NOT REQUIRED)
OVERCOAT V3 Alone
Bake each panel with an IR lamp to reach a surface temperature of 140°F (60°C) for 15 min at a distance of ~ 30″ from the panel.
OVERCOAT V3 over Another Coating
If applying over another coating, install base coating layer first. Wait 2 hours, then install OVERCOAT V3 in the same application pattern as the base coating. If IR baking is desired, immediately bake each panel with an IR lamp to reach a surface temperature of 140°F (60°C) for 15min at a distance of ~ 30″ from the panel after OVERCOAT V3 is applied to all surfaces.
POST APPLICATION INSTRUCTIONS
Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
Avoid all chemicals including car washes for 7 days.
Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.
CLIMATE NOTES
All FEYNLAB® Coatings are subject to different application dwell and cure time windows due to humidity and temperature conditions. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher, consider lessening the recommended dwell and wipe times for the coating.
Additionally, moving air will decrease coating dwell times for areas it contacts. Therefore, it is recommended to stop all moving air as much as possible during coating applications to ensure consistency for all portions of the vehicle.
Coatings are best applied in temperature-controlled environments of 50°F-85°F (10°C-30°C), with humidity as low as possible.
SHELF LIFE
Unopened: 1 year // Opened: 3-4 months (in a normal, climate-controlled environment).